Schematic Diagrams: Philips HTS3538 – SMPS and Power amplifier circuit diagram, software update, service mode

Monday, August 7, 2017

Philips HTS3538 – SMPS and Power amplifier circuit diagram, software update, service mode

Philips Home Theater DVD Player HTS3538/12/51/55/05/98

Amplifier
Total output power: 600W RMS (30% THD)
Frequency response: 20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /(A-weighted)
Input sensitivity: AUX: 2 V
Music iLink: 1 V

Subwoofer
Output power: 100 W RMS (30% THD)
Impedance: 4 ohm
Speaker drivers: 133 mm (5.25") woofer
Dimensions (WxHxD): 160 x 267.5 x 265 mm
Weight: 2.55 kg

Speakers

Center speaker:
Output power: 100 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") woofer
Dimensions (WxHxD): 160 x 85 x 95 mm
Weight: 0.37 kg
Front/Rear speaker:
Output power: 4 x 100 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 76.2 mm (3") twin driver
Dimensions (WxHxD):
Speakers: 85 x 160 x 95mm
Tall speakers: 240 x 1007 x 240 mm
Weight:
Speakers: 0.35 kg/each
Tall speakers: 1.57 kg/each

Software upgrade method

1.Copy the bin file as "HTS3538_XX.bin".

2.Then use the file to burn the upgrade CD-R/CD-RW.

3.Put the CD in the tray ,let the player loading the disc.

4.If the CD is correct ,it will display the Upgrade Menu ,press the PLAY key on the remote control to start upgrade

5. Afer a while, the tray will open automatically ,but must not power off the player.

6.Don't power off ,wait until the player reset automatically ,the whole upgrade process may need 2 minutes .HTS will auto standby after complete upgrade.

if you upgrade with USB device

1. Step1 is same with DISC upgrade;

2.Copy the renamed bin file(upgrade file) to the root menu of USB device.

3.connect the USB device to HTS ,and switch to USB source;

4.The rest is same to step 4,step 5 and step 6 with DISC upgrade.

[The set must not be power off during upgrading; Otherwise the Main board will be damaged entirely.]

How to adjust the setting after repairing: [Service mode]

1 HTS3538/12: Open DVD tray, press “9” “9” “9” “9” “5” on R/C; 2” on R/C;

2 HTS3538/51: Open DVD tray, press “9” “9” “9” “9” “5” on R/C;

3 HTS3538/55: Open DVD tray, press “9” “9” “9” “9” “4” on R/C;

4 HTS3538/05: Open DVD tray, press “9” “9” “9” “9” “2” on R/C;

5 HTS3538/98: Open DVD tray, press “9” “9” “9” “9” “3” on R/C;