Wednesday, December 30, 2015
Wednesday, December 16, 2015
Thursday, December 10, 2015
Tuesday, December 8, 2015
Monday, December 7, 2015
Sunday, December 6, 2015
LG FLATRON W2234S-SNI - W2234S-BNI - LCD MONITOR - SMPS and INVERTER SCHEMATIC
Power Supply Regulator and Back-light Inverter Circuit Diagram - LG Flatron W2234S-SNI - W2234S-BNI.Axx*QP Monitor
xx * means sales region and module
type
(AxxIQP: INL 5ms, AxxVQP: AUO 5ms)
SMPS SCHEMATIC
Power Part.
This part consists of the one 3.3V, and one 1.8V regulators to convert power which is provided 5V in Power board. 16V is provided for inverter, 16V is provided for LCD panel and 5V for micom. Also, 5V is converted 3.3V and 1.8V by regulator. Converted power is provided for IC in the main board. The inverter converts from DC16V to AC 700Vrms and operates back-light lamps of module.
This part consists of the one 3.3V, and one 1.8V regulators to convert power which is provided 5V in Power board. 16V is provided for inverter, 16V is provided for LCD panel and 5V for micom. Also, 5V is converted 3.3V and 1.8V by regulator. Converted power is provided for IC in the main board. The inverter converts from DC16V to AC 700Vrms and operates back-light lamps of module.
INVERTER
Saturday, December 5, 2015
Wednesday, November 18, 2015
Monday, November 16, 2015
Sunday, November 15, 2015
HP L2035 TFT LCD MONITOR - POWER and INVERTER CIRCUIT DIAGRAM
SMPS and BACK-LIGHT INVERTER SCHEMATIC
Used ICs: OZ960G – FDS8958A – TEA1533AP-N1 – STU9NC80ZI-Switching FET
POWER - SMPS
BACK-LIGHT INVERTER
CLICK ON THE SCHEMATICS TO ZOOM IN
Wednesday, October 28, 2015
SYLVANIA C6615LE 15 inch COLOR LCD TELEVISION Circuit Diagram
C6615LE 15” COLOR LCD TELEVISION Circuit
Diagram. Sylvania and Funai
Fixed voltage (or Auto voltage selectable)
power supply circuit is used in this unit.
If Main Fuse (F601) is blown, check to see that all components in the
power supply circuit are not defective before you connect the AC plug to the AC
power supply. Otherwise it may cause
some components in the power supply circuit to fail.
The voltage for parts in hot circuit is
measured using hot GND as a common terminal.
BECAUSE A HOT CHASSIS GROUND IS PRESENT
IN THE POWER SUPPLY CIRCUIT, AN ISOLATION TRANSFORMER MUST BE USED. ALSO, IN ORDER TO HAVE THE ABILITY TO
INCREASE THE INPUT SLOWLY, WHEN TROUBLESHOOTING THIS TYPE POWER SUPPLY CIRCUIT,
A VARIABLE ISOLATION TRANSFORMER IS REQUIRED.
SCHEMATIC DIAGRAM [Click on the Schematics to Magnify]
LCD UNIT
Main board [Contains back-light inverter and SMPS]